Image size for websites is a deep and complex subject. There are many factors to understand and to take into account, and it’s not a topic where an easy, one size fits all answer will suffice. But if you want to know more about how images work with your Avada website, and get a general overview of the factors at play, read on.

When we speak of image size, it is useful to keep in mind the two different sides of the issue. The first one is “What size images should I upload?”, while the other side is “What affects how large my images are displayed?” And these are not independent questions. You can’t answer the first one without also considering the second.

With this Image Size Guide, we aim to give you the information you need to gauge how big or small your images should be to fit your website, as well as to ensure that they look crisp on your viewers’ screens. The size and quality of the images on your website depends on a whole range of factors, such as how big you upload them, your site width, whether they’re in columns or being used as a background image, whether you use sidebars, and even the resolution of the end user’s screen, to name just a few. Continue reading below to learn more about these factors. Also, take a look at our extensive blog article, ‘A Comprehensive Guide To WordPress Image Optimization’, to explore the basics of image optimization.


What Size Images Should I Upload?

Images that are too large are one of the main causes for slow loading websites. So if you want a really slow website, just upload images straight from your phone, camera or other capture device. These are often over 5,000px in width and up to six or seven megabytes in size. This will ensure your pages take forever to load. This approach is incredibly common, yet it doesn’t take into account the size (both in pixels, and in kilobytes, or even megabytes) of the image being uploaded.

But we all want fast loading websites, and so we need to consider these things. To do this, and to determine what size our images should be, we need to understand a few things about images, and about how big the space we are adding the images into actually is. The first thing to understand is how images for the web are sized.

Pixel Size and File Size

For a start, forget about what ppi (pixels per inch) your image is. It makes no difference in a web browser, and doesn’t affect file size either. It is a printing instruction, and can be completely ignored with images for the web. Despite this, it’s a standard to upload images that are at 72ppi.

The most important figure to understand about images for the web is the pixel dimensions. Capture devices, like cameras and phones, capture images at a fixed aspect ratio and size. The longest length of an image is usually in the range of 3,000 – 7,000 pixels, but this depends entirely on the device. But this is what you most need to consider when preparing your images for uploading to a website. We will cover more on what’s an appropriate size, but as a very rough guide, images around 2,000 – 2,500 pixels on the longest length are considered the largest size you’d ever need to upload. In many cases, images around 600 – 1200 pixels would be more appropriate. And images that are only a couple of hundred pixels in width (like logos) will be fine in small Columns, but would pixelate if added to larger Columns.

When it comes to file size, this is determined by three things – the complexity of the image (an image of the blue sky will be much smaller than the same sized image of a forest), the pixel dimensions of the image, and the compression applied to the image. There’s not much you need to know about the first one, and the second one will be determined by other considerations, but the compression is also important. This setting, available in virtually all graphics software, as well as via image optimisation websites or WordPress plugins, reduces the kilobyte size of an image, and optimizes it for the web. The more compression you apply, the smaller the file size. But quality is also reduced. So a balance between the two needs to be found. To learn more about image size and compression, read this detailed blog post.

Image Formats

Image size is also directly affected by your choice of image format. This is a huge topic, and way too big for a tutorial such as this, but basically, there are two major file fomats you are likely to be using on your website, as well as a few more upcoming and possible formats. There are both vector and raster image formats, and each format has their own strengths and weaknesses. For a more detailed look at image file formats, view this excellent article at HubSpot, or this one at Kinsta.


JPG (.jpg or .jpeg) is the most common image raster format for the web, most suitable for photos. It compresses well (maintains quality relatively well for the file sizes you can achieve). It doesn’t support transparency, but it’s by far the most common image format.


PNG (.png) is also a very common image format, with specific strengths. It was invented to replace GIFs, and is a lossless format and also supports transparency. This means it is great for logos and other images that require transparency. It is also a good format for high quality photos, but the comparitive file size is much bigger than a jpg.

Avada Logo


GIF (.gif) is a lossless format, meaning that a GIF retains all the data contained in the file, but they are smaller than JPGs, specifically because they only accommodate up to 256 indexed colors. GIF also supports transparency, but for logos, PNGs are a better format. This format is slowly being replaced by the .png format, but where GIFs still shine, is that they can be animated, and so are very useful in some situations.


SVG (.svg) is a vector format, which while having wide browser support, is not yet as easy a file format to implement as the others. It is however a great choice for logos, or other graphics you want to be tack sharp. Unlike raster formats seen in JPG, GIF, and PNG, an SVG image remains crisp and clear at any resolution or size, because they are mathematically declared shapes and curves, not pixels.


WebP is the new kid on the block, this file format is developed by Google, and was developed specifically to provide better lossless and lossy compression of images. This format does not have 100% browser support at this time, but there are ways around this using image optimisation plugins like ShortPixel. For more info on how to implement WebP with WordPress, check out this post.

So, What Size Images Did You Say I Should Upload?

Images Within The Site Width

So, now you know a bit about resizing images, and what formats to potentially use, how do you actually decide how big your images should be? Well, it all starts with your Site Width. You’ll find this setting in Avada > Options > Layout > Site Width. This can be a percetage value, but web design is still largely pixel based, and the current default width is 1200px (this is to do with screen reslolutions, which we will get to…)

Let’s say your Site Width is 1200px. That means that all the content on your site will display across 1200 pixels of the monitor it’s being viewed on. As an example, the content on this documentation, including the sidebar, is 1300px. (You can break the content out of this Site Width by using the 100% Width setting on Containers, or a slider, but again, we will get to that…)

Therefore, if you had a full width Column with an Image Element, an appropriate size for your image would be around 1200px. To determine the image size, we just need to consider the width (in pixels) of the area it will be added to.

So now, let’s say you have two one-half columns, and you want an image to display in one of them. How big does that image need to be? Well, around half of the Site Width would be a good starting point. So, around 600px. If you optionally wanted the image to be able to be opened in a Lightbox, you might initally upload a larger version (perhaps 1000 – 1500px) and then insert a 600px version into the column, and the full size into the Lightbox option of the Image Element.

In the example below, instead of being added via the Image Element, the image has been added to the background of the Column (to enable the overlaid Text and Button Elements). But it’s still being displayed in a one-half Column, and so an image size of approximately 600px would be appropriate. You could still enable a Lightbox with this method as well, only you’d do that via the Link URL and Link Target options in the Column itself.

Images Using The Screen Width

Now, let’s say you want to use the image in the background of a Container that’s set to 100% width, or as an image in a full screen slider? Both methods break the image out of the Site Width, and now it’s a completely different consideration we have to take. Now, what’s most important is the screen resolution (or pixel width) your users are viewing it on. This can be tricky, as there are many different screen resolutions.

The most common is still standard laptop resolution (1366px). This is why the deafult Site Width is 1200px, so that the content fits on this screen resolution. But Full HD (1920px) is the second most common resolution, and 4K monitors are gaining in popularity as well (3840px). Some iMacs even have 5K resolution (5120px). So, how do we take all these different screen resolutions into account? A common way to approach this is to use an image size of around 2,000-2,500px. This covers most screen resolutions, and it not interpolated significantly except for 5K monitors.

In the first example below, the page is using the 100% width template, which means that any container background images go full width. The container itself is also set to Full Height. And so the image size needs to be large enough to fill the screen. In this case, the image used is 1803px x 902px, which is almost the size of a HD monitor resolution. This could be bigger, but here it’s being used as a background image, and so the quality is not as important.

Note: Just to be clear, if viewed on a 5K iMac, this 1803px image would be distributed across the full 5120px of the iMac’s screen (less scrolling bars), effectively reducing the quality of the image. But on a laptop, with a resolution of only 1366px, the image would be more than big enough, and would be crisp. It’s all about finding a sweet spot between screen resolution and file size (which comes directly from your choice of pixel dimensions). If you were sure most of your users were using iMacs, you’d probably make this image closer to 4000-5000px, but it would then be a much larger file.

In the second example, the image is being used in a full screen slider. In this case, the image is sized at 2500px width, which on more than 95% of screen resolutions, would be larger than the monitor’s resolution and therefore be nice and sharp. With larger images such as these, optimisation of images using compression becomes even more important to keep file size, and therefore page load speed, down.

Image Compression

Once you know what the largest size is of an image you want to upload, then you need to prepare it. This simply involves resizing it to the desired pixel width, and then applying compression before uploading it to your server. To learn more about image compression, read this detailed blog post, or our own blog post on Image Optimization.

In short, you can use graphics software like Adobe Photoshop to compress your images for web as you save them. Alternatively, there are many good websites, such as Compressor. Additionally, you can also use image compression plugins, such as Short Pixel, to further compress image. A bonus is that you can also use such plugins to generate .WebP images on your site.

A well compressed image that has first been resized to the correct pixel values can be many times smaller than the original file. in the example below, you can see that the original jpg was 805kb, but that with 40% compression, the final size of the image came down to only 163kb, almost 5 times smaller.

Options That Influence Image Size

As mentioned above, the size of the area the image will be displayed in is the major factor that determines how big it should be. Here are the main theme related areas that will affect this.

  • Site Width – Located in the Global Options > Layout panel. This setting allows you to set the overall width of your site, which can affect how big or small your images should be, and how big they will display. This also affects your columns, which will affect any images you display inside them.
  • Page Template – As previously mentioned, if using the 100% Width Page Template, any images added as background images into a full width Container display at the full width of the user’s screen (less any left/right Container margins and scrolling bars).
  • Container > Interior Content Width Option – Also, if using the 100% Width Page Template, any Container can have the Interior Content Width options set to 100% Width, thereby making the Container’s content stretch the full width of the viewer’s screen (again less any Container margins and scroll bars).
  • Column Width – Set in the individual Containers, the size of the Columns, as described above, has an obvious effect on what size image should be used. A good rule of thumb, when not using Sidebars, is to use an image sized at the Site Width divided by the Column Width.
  • Sidebars – Located in the Global Options > Layout panel, or in the Avada Page options. Having a sidebar allows you to set a sidebar width, which will affect Column size as well.

  • Dual Sidebars – Located in the Global Options > Layout panel, or in the Avada Page options. You also have the option to have 2 sidebars on each side of your website, and this will also affect Column Size.

  • Margins & Individual Element Spacing – Column sizes, and individual Elements, also have spacing options, such as padding and margins. A good example is column spacing, which affects how wide columns are displayed on the page, which in turn affects how big your images in columns will display.

Example: As can be seen in the example below, if we start with a Site Width of 1170px (this is what the Charity Website has), but then use a dual sidebar layout, using the global option defaults, the sidebars combined take up 42% of the site width. This leaves approximately 679 pixels for the content area. And then there are the Column margins. So if adding an image in a one-half Column in this situation, it would only need to be around 330px width.

Slider Image Sizes

  • Fixed Width – If you’re using a fixed width slider, then the appropriate image size for your slider would be your slider width and height. For example, if you have a slider width of 1100px and a slider height of 500px, then your image size should be 1100px wide and 500px high.
  • 100% Width – As for siders that are 100% width, the image size you should use depends on a few factors such as the screen it’s being viewed on, and the slider height. As a general rule, we currently use images that are 2000px wide for our prebuilt websites, which is usually big enough to make images look great on all common screen resolutions. As 4K monitors penetrate the market in bigger numbers, this might have to increase. The height of the image depends on the pixel value you’ve set for the slider. For example, if you have a slider that is 100% wide and 400px high (see screenhsot below), then your image size should be around 2000px wide and 400px high.

  • Full Screen Slider – Images for Full Screen sliders fully depend on the screen it’s being viewed on. Because it’s difficult to tell what screen your viewers are viewing your site on, it’s best to use a general size that is big enough for all general screen sizes. As a guide, we use images that are around 2000px wide and 1100px high for full screen sliders on our prebuilt websites.

Attachment Display Settings

One crucial thing to understand – when uploading an image to your Media Library, a range of images of different sizes are automaically created at the same time. WordPress creates some of these (the Small, Medium, and Large Thumbnail sizes specified in WordPress > Settings > Media, and one unlisted intermediate size) and Avada itself creates a number of sizes to best suit certain situations. These image sizes are then automatically applied to different sections of the site. See the How Avada Controls Responsive Images document for more details on this.

When adding an image into the page content, such as through Elements, you’ll find the ‘Attachment Display Settings’ section at the bottom right of the Media Library. Your choices in this section also directly affects how your images display on the page, as here you are choosing which version of the image to use.

Step 1 – When you upload an image into the page content, the Media Library window will appear.

Step 2 – Select or upload your desired image. At the bottom right side of the window, find the ‘Attachment Display Settings’ section.

Step 3 – Under this section, you’ll find the ‘Size’ option. Using this option, you can select which size to use when uploading an image. You can choose between Thumbnail, Medium, Large or Full Size, plus a range of Avada size settings.

Step 4 – Choose the right image for the area you are adding the image into.

Container Background Image Sizes On Mobile Devices

When uploading a background image to an Avada Builder Container, you may notice that only a portion of your image is displayed when viewed on mobile or tablets. This is how the theme naturally handles background images, and is not a responsive issue. The background image is first centered, then it will resize proportionally until the image’s width or height is equal to the container’s width or height (whichever is greater). For example, if you have a 500px x 500px image and a 100px x 350px container, then your background image will be resized to 350px x 350px. Please refer to the examples below for a visual representation of this.


Getting images right is a crucial part of a visually interesting and fast loading website. And there’s a learning curve to be sure. But the benefits to be had are numerous, and it’s all part of the fun of building and maintaining an Avada website!


Watch the video below for A Guide To Image Formats & Sizes for Websites.

For privacy reasons YouTube needs your permission to be loaded.
I Accept

Subscribe To Our Newsletter

Receive all of the latest news and updates fresh from ThemeFusion!

Leave a comment